Inspeksi dan pengamatan Struktur

Inspeksi dan pemantauan struktur

Brand : Controls – Italia

Kode Barang : 58 – D0567

Deskripsi Umum :

Pengantar 
Tekanan bagian struktur di lokasi, baik deformasi maupun ketahanan pasangan bata dapat diamati melalui metode Flat Jacks. Prosedur pengujiannya dengan membuat potongan kedalam yang seragam pada bagian mortar dan memasukan sepasang flat jack, yang kemudian di berikan tekanan sampai pada level yang diinginkan.

Mode Pengujian:
Untuk mencari nilai tekanan maka harus menggunakan single flat jack
Untuk mencari nilai deformasi dan nilai ketahanan maka harus menggunakan sepasang Flat Jacks.

Flat Jack harus diberi tekanan terlebih dahulu kemudian pembacaan pengukuran dilakukan dengan alat baca analog atau digital seperti dibawah :

Pengukuran Analog
Diharuskan menggunakan aksesoris dibawah ini:

• 58-D0568/A  Hydraulic pump with gauge. See accessories.
• 58-D0567/RS  Connecting hose (to connect the two jacks). See accessories.
• 58-C230/30D Mechanical strain gauge. See accessories.

Pengukuran Digital
Diharuskan menggunakan aksesoris dibawah ini:

• 58-D0568 Hydraulic pump, less gauge. See accessories.
• 58-P0050  Pressure transducer. See accessories
• 58-D0567/RS  Connecting hose (to connect the two jacks). See accessories.
• 58-D0585  Electronic extensometer (one to three). See accessories.
• 82-P9008: DATALOG 8, 8 channels stand alone multipurpose data logger (see accessories)

Note. In order to fill conveniently the testing cut, use the sets of steel sheets of the same flat jack dimensions. See accessories.

Weights:

• 58-D0567/C2, 58-C0567/C20 …..kg. approx.
• 58-D0567/E2, 58-D0567/E20  …..kg. approx.

Ordering Info :

58-D0567/C2  
Rectangular flat jack 400x200x4,5 mm, 50 bar max. working pressure.

58-D0567/C20  
Rectangular flat jack 400x200x4,5 mm, less valves. 50 bar max. working pressure.

58-D0567/E2   
Semioval flat jack 350x260x4,5 mm, 50 bar max. working pressure.

58-D0567/E20   
Semioval flat jack 350x260x4,5 mm, less valves. 50 bar max. working pressure.

Accessories : 

Steel sheets to fill the testing cut
58-D0567/C11 
Set of five rectangular steel sheets 400x200 mm

58-D0567/E11 
Set of five semioval steel sheets 350x260 mm

Hydraulic hose
58-D0567/RS
Connecting hose to connect two jacks. 2m length

For load application
58-D0568/A 
Hydraulic hand pump with pressure gauge 0-100 bar scale. Complete with integral reservoir and 3 m of flexible hose. Weight approx.: 8 kg.

58-D0568  
Hydraulic hand pump, without gauge, complete with integral reservoir and 3 m of flexible hose.

For strain and load measurement
58-C0230/30D
Mechanical strain gauge for the measurement of length variation. Measuring base 300 mm x 5 mm range. Digital gauge, 0.001 mm resolution, output for PC connection output for PC (special cable required, see accessories).
For more info please refer to link to other product below. 

58-D0585  
Tubolar electronic extensometer. It consists of a tubular telescopic frame fit with an electronic displacement sensor. It has to be fit to the wall by normal anchor bolts.

• Measuring range: 10 mm
• Span: 300 mm
• Linearity: 0.3%
• Weight approx.: 0.2 kg

82-P0050
Pressure transducer, 0-50 bar

82-P0349/ELT
Connection cable for connection transducer to datalogger

58-D0568/4  
Connecting coupling for pressure transducer

82-P9008: DATALOG 8, 8 channels stand alone multipurpose data logger.

• Adjustable 5.7" touch screen colour graphic display
• 8 independent input analogue channels
• Numerical and graphical display of readings
• Compatible with load cells, pressure transducers, strain gauges, LDT / LVDT / potentiometric displacement transducers
• Programmable VEXC via firmware from 1 to 10 V for each couple of channels (up to 4)
• Effective resolution: 131,000 points
• Requires power supply. Battery packs for in situ application are available as accessories. For more info please refer to link to other product below. 
• 110-230V / 50-60Hz / 1 Ph

82-P9008/ELT
Set of four cables for connecting load cells, pressure transducers, strain gauges, LDT / LVDT / potentiometric type displacement transducers to  DATALOG 8 (82-P9008)
Note: cables P9008/ELT are necessary in addition to 82-P0349/ELT

Price : Call For Info

Yudhistira

Hp. 0811 188 6845;

 – 0818 0816 0634(WA)

Email : [email protected];